S u p p l i e r  o f  L a b  e q u i p m e n t                   
 
                             
 
                                                                 A c c e s s o r i e s
Pick Testing Waxes
Item

 

For evaluation of surface strength on paper and paperboard.

17 sticks numbered from 2a to 23a

The wax test is applicable to coated and uncoated papers and is formulated to evaluate the surface strength of paper or its resistance to picking. This test may be conducted to determine the degree of sizing in the coating in relation to the required press conditions; to estimate the ease with which a coating may be removed or picked from the body stock, and the tendency of the body stock to split or the fibers to be separated under the tensile stress of the printing process. It is used in a similar manner for evaluating uncoated paper and other surfaces.

- Used in conjunction with the wax pick test method (TAPPI

  T459 om-93, ASTM D 2482-93 and CPPA D-11)

- Simple, easy to use, and inexpensive.
- Testing Waxes are available in a full test kit

- Retail trade

Box of

8 sticks

Standardized Aluminum Foil

Item

Aluminum foil for checking the overall performance

of Burst testers.Size: 3" X 3"

For Paper:

            Range

            5 -10 psi      (35 - 69 kpa)

            11 -20 psi     (76 - 138 kpa)

            21 - 30 psi    (145 - 207 kpa)

            31 - 51 psi    (214 - 345 kpa)

            51 - 65 psi    (352 - 448 kpa)

            66 - 80 psi    (455 - 551 kpa)

            81 - 110 psi   (558 -758 kpa)

            130 -150 psi   (896 - 1034 kpa)

For Board:

              Range

              40 - 69 psi  (275 - 475 kpa)

              70 -109 psi (482 - 752 kpa)

              110 - 130 psi (758 - 896 kpa)

              140 - 170 psi (965 - 1172 kpa)

              171 - 200 psi (1179 - 1379 kpa)

The entier content of each package is requiered for one calibration test.

Package

of 10 sheets

 

 

RCT Test Accessories
Item

A complete set of RCT test accessories consist of 8 rings with different diameters for different thickness of paper and one ring holder presented in a wooden box.

Dimension Rings

Ring 1:       47.8 mm (1.881 inches)

Ring 2:       48.0 mm (1.889 inches)

Ring 3:       48.2 mm (1.897 inches)

Ring 4:       48.3 mm (1.901 inches)

Ring 5:       48.5 mm (1.909 inches)

Ring 6:       48.6 mm (1.913 inches)

Ring 7:       48.7 mm (1.917 inches)

Ring 8:       48.8 mm (1.921 inches)
Complet Rct Accessories

 

Replacement Set for Circular Cutter
Item

 

Consisting of 100 Razor blades and 5 cutting pads

 

100 blades

5

pads